finger spreader · pointed 20 · 25 mm · dentsply sirona
finger spreaderpointed tipsize 2025 mmpack of 4
dentsply sirona list their finger spreaders for cold obturation. maillefer add that they are used for lateral condensation, are made from stainless steel and are colour-coded for easy, positive identification.
this pack: 4 × finger spreaders, pointed tip, size 20, 25 mm · ref a020602502000
made by dentsply sirona (maillefer)
| use | spreaders for cold obturation; lateral condensation (dentsply sirona, maillefer) |
| tip | pointed |
| size | 20 (.20) |
| length | 25 mm. dentsply sirona list the range in 21 mm and 25 mm |
| material | stainless steel (maillefer) |
| identification | colour-coded (maillefer); the handles are numbered, size 20 as pictured |
| cleaning | dentsply sirona publish a separate cleaning & sterilization guide for maillefer accessories. the product pages do not state a method themselves, so check that guide and follow your own decontamination procedure. |
which sizes do you stock?
this listing is size 20. the size 30 pack is finger spreader, pointed 30, 25 mm.
what do i use with them?
auxiliary gutta-percha points and a gutta-percha gauge are among the cold lateral products we stock, listed below.
| dentsply sirona | auxiliary gutta percha a · b · c · d · a–d assorted (120 each) |
| gauge | dentsply sirona gutta percha gauge, blue |
finger spreader · pointed 20 · 25 mm · pack of 4 · stainless steel · dentsply sirona · ref a020602502000
finger spreader · pointed 30 · 25 mm · dentsply sirona
finger spreaderpointed tipsize 3025 mmpack of 4
dentsply sirona list their finger spreaders for cold obturation. maillefer add that they are used for lateral condensation, are made from stainless steel and are colour-coded for easy, positive identification.
this pack: 4 × finger spreaders, pointed tip, size 30, 25 mm · ref a020602503000
made by dentsply sirona (maillefer)
| use | spreaders for cold obturation; lateral condensation (dentsply sirona, maillefer) |
| tip | pointed |
| size | 30 (.30) |
| length | 25 mm. dentsply sirona list the range in 21 mm and 25 mm |
| material | stainless steel (maillefer) |
| identification | colour-coded (maillefer); the handles are numbered, size 30 as pictured |
| cleaning | dentsply sirona publish a separate cleaning & sterilization guide for maillefer accessories. the product pages do not state a method themselves, so check that guide and follow your own decontamination procedure. |
which sizes do you stock?
this listing is size 30. the size 20 pack is finger spreader, pointed 20, 25 mm.
what do i use with them?
auxiliary gutta-percha points and a gutta-percha gauge are among the cold lateral products we stock, listed below.
| dentsply sirona | auxiliary gutta percha a · b · c · d · a–d assorted (120 each) |
| gauge | dentsply sirona gutta percha gauge, blue |
finger spreader · pointed 30 · 25 mm · pack of 4 · stainless steel · dentsply sirona · ref a020602503000
protaper ultimate® hand · fx · 21 mm
larger canalsstraighter canalshand use
the protaper ultimate® fx, without the motor. dentsply sirona make every file in the range in a hand version, and their fact file is plain about what changes: “a dedicated hand-use version is available for all protaper ultimate® files with the same technical features as the rotary ones.” this is the 21 mm version – the same file on the shortest shaft, for short teeth or where opening is limited.
this pack: protaper ultimate® fx hand file, 21 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
| printed size | 035.012v – iso 35 tip, .12 variable taper |
| heat treatment | blue |
| role | dentsply sirona’s larger-canal sequence asks for “either a mechanically driven or manual auxiliary file, finisher fx”, in larger and straighter canals only. |
| rotary version | protaper ultimate® fx, 21 mm |
| other lengths | 25 mm · 31 mm |
› same file, same place in the sequence. slider, shaper, then f1 to f3 as the canal gauges; fx and fxl for larger, straighter canals.
› matched obturation still applies. dentsply sirona match paper points and cones to the colour and size of the last file used – by hand or by motor.
› discard on deformation. their procedure: inspect the flutes on removal, and discard any file showing unwinding, straightening or stretching.
how do i use the hand version?
follow the instructions for use supplied with the hand files. the dentsply sirona literature we hold sets out the motor-driven technique, so we will not describe a manual one in its place – ask us if you would like the ifu chased.
can i mix hand and rotary in one case?
dentsply sirona’s larger-canal sequence names fx and fxl as either mechanically driven or manual, and their fact file gives the hand files the same technical features. beyond that, follow the ifu.
| motor-driven | protaper ultimate® fx, 21 mm |
| full hand set | protaper ultimate® hand sequence, 21 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 21 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| dry | paper points, fx |
| fill and seal | conform fit® gp, fx · ah plus®, neosealer® ezflo, 21 mm tips or proroot® bio sealer |
protaper ultimate® hand fx, 21 mm (6) · 035.012v · blue heat treatment · niti hand file · dentsply sirona · ref bstpulh6210fx
protaper ultimate® hand · fx · 25 mm
larger canalsstraighter canalshand use
the protaper ultimate® fx, without the motor. dentsply sirona make every file in the range in a hand version, and their fact file is plain about what changes: “a dedicated hand-use version is available for all protaper ultimate® files with the same technical features as the rotary ones.” this is the 25 mm version, the middle of the three lengths.
this pack: protaper ultimate® fx hand file, 25 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
| printed size | 035.012v – iso 35 tip, .12 variable taper |
| heat treatment | blue |
| role | dentsply sirona’s larger-canal sequence asks for “either a mechanically driven or manual auxiliary file, finisher fx”, in larger and straighter canals only. |
| rotary version | protaper ultimate® fx, 25 mm |
| other lengths | 21 mm · 31 mm |
› same file, same place in the sequence. slider, shaper, then f1 to f3 as the canal gauges; fx and fxl for larger, straighter canals.
› matched obturation still applies. dentsply sirona match paper points and cones to the colour and size of the last file used – by hand or by motor.
› discard on deformation. their procedure: inspect the flutes on removal, and discard any file showing unwinding, straightening or stretching.
how do i use the hand version?
follow the instructions for use supplied with the hand files. the dentsply sirona literature we hold sets out the motor-driven technique, so we will not describe a manual one in its place – ask us if you would like the ifu chased.
can i mix hand and rotary in one case?
dentsply sirona’s larger-canal sequence names fx and fxl as either mechanically driven or manual, and their fact file gives the hand files the same technical features. beyond that, follow the ifu.
| motor-driven | protaper ultimate® fx, 25 mm |
| full hand set | protaper ultimate® hand sequence, 25 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 25 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| dry | paper points, fx |
| fill and seal | conform fit® gp, fx · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
protaper ultimate® hand fx, 25 mm (6) · 035.012v · blue heat treatment · niti hand file · dentsply sirona · ref bstpulh6250fx
protaper ultimate® hand · fx · 31 mm
larger canalsstraighter canalshand use
the protaper ultimate® fx, without the motor. dentsply sirona make every file in the range in a hand version, and their fact file is plain about what changes: “a dedicated hand-use version is available for all protaper ultimate® files with the same technical features as the rotary ones.” this is the 31 mm version, for long roots that a 25 mm file will not take to working length.
this pack: protaper ultimate® fx hand file, 31 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
| printed size | 035.012v – iso 35 tip, .12 variable taper |
| heat treatment | blue |
| role | dentsply sirona’s larger-canal sequence asks for “either a mechanically driven or manual auxiliary file, finisher fx”, in larger and straighter canals only. |
| rotary version | protaper ultimate® fx, 31 mm |
| other lengths | 21 mm · 25 mm |
› same file, same place in the sequence. slider, shaper, then f1 to f3 as the canal gauges; fx and fxl for larger, straighter canals.
› matched obturation still applies. dentsply sirona match paper points and cones to the colour and size of the last file used – by hand or by motor.
› discard on deformation. their procedure: inspect the flutes on removal, and discard any file showing unwinding, straightening or stretching.
how do i use the hand version?
follow the instructions for use supplied with the hand files. the dentsply sirona literature we hold sets out the motor-driven technique, so we will not describe a manual one in its place – ask us if you would like the ifu chased.
can i mix hand and rotary in one case?
dentsply sirona’s larger-canal sequence names fx and fxl as either mechanically driven or manual, and their fact file gives the hand files the same technical features. beyond that, follow the ifu.
| motor-driven | protaper ultimate® fx, 31 mm |
| full hand set | protaper ultimate® hand sequence, 31 mm (5) · slider, shaper, f1, f2, f3 |
| patency | a small stainless steel hand file in 31 mm, as the sequence asks for when the slider will not reach – there is no 31 mm c-pilot®, so ask us |
| dry | paper points, fx |
| fill and seal | conform fit® gp, fx · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
protaper ultimate® hand fx, 31 mm (6) · 035.012v · blue heat treatment · niti hand file · dentsply sirona · ref bstpulh6310fx
protaper ultimate® · sx · 19 mm
restricted accesspre-enlarging the canal bodyrelocating the orifice
a canal orifice that sits hard against a root concavity, or a coronal third too tight to let the slider in cleanly. that is what the sx is for. dentsply sirona call it the auxiliary shaping file: optional, used before the slider, and only where the anatomy asks for it. sx comes in one length, 19 mm.
| 20/.03v tip / taper | 19 mm one length | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® sx rotary file, 19 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› what it is for, in dentsply sirona’s words. step 3 of their procedure: the sx “may be used when there is restrictive space, to pre-enlarge the body of a canal, or to relocate the coronal-most aspect of a canal away from an external root concavity.”
› optional, not step one. the standard sequence is slider, shaper, finishers. the sx sits outside it, which is why it is sold on its own rather than inside the sequence packs.
› same motor settings as the rest. no change at the motor between the sx and the slider that follows.
1 access first. prepare an access that lets you identify each canal orifice (step 2).
2 sx where space is restricted. pre-enlarge the body of the canal or move its coronal aspect away from a concavity (step 3).
3 then the slider. in the presence of a lubricant, passively follow the canal to its terminus and determine working length (step 4).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 020.003v – iso 20 tip, .03 variable taper |
| role | orifice opener, auxiliary shaping file |
| length | 19 mm only |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 19 mm only |
| hand version | protaper ultimate® hand sx, 19 mm |
do i need the sx on every case?
no. dentsply sirona write it as something that may be used, and name the three situations. plenty of cases go straight to the slider.
why only 19 mm?
its job, as step 3 describes it, is in the body and coronal aspect of the canal. dentsply sirona list it at 19 mm only, in rotary and hand versions.
is it in the sequence packs?
no – those carry slider, shaper, f1, f2 and f3. the sx is bought separately, as here, and it is in the treatment solution box.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| next file | protaper ultimate® slider, 25 mm |
| patency | c-pilot® 010, 19 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points matched to your last finisher (f1–f3 assortment shown) |
| fill and seal | conform fit® gutta-percha, f1–f3 assortment · ah plus®, neosealer® ezflo, 21 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® sx, 19 mm (6) · 020.003v · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr6190sx
protaper ultimate® · f3 · 21 mm
wider canalsapical shapingdeep shape
f2 came out loose and clean as well. then the canal is wider than f2’s tip, and dentsply sirona’s standard sequence finishes on f3: 30/.09v, gold heat-treated, the steepest apical taper of the three standard finishers. this is the 21 mm version – the same file on the shortest shaft, for short teeth or where opening is limited.
| 30/.09v tip / apical taper | gold heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® f3 rotary file, 21 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› 9% at the apex. the deep-shape principle carried to the largest standard finisher – f1 7%, f2 8%, f3 9% apical taper.
› why dentsply sirona want the shape deep. their fact file argues that removing debris and smear layer by irrigation is less predictable apically than coronally, and that apical shape influences it – so the finishers keep the apical taper up.
› gold heat-treated. post-grinding, the same as the shaper, f1 and f2.
1 only after f2. if f2 is loose at length and its apical flutes are not loaded with debris, select f3 and use it the same way (step 12).
2 finished when two things agree. “the preparation is finished when the apical extent of any finisher is loaded with debris, and the corresponding gutta-percha point fits at the wl” (step 15).
3 then disinfect and dry. 3-d disinfection with the endoactivator®, then matched absorbent points (steps 16–17).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 030.009v – iso 30 tip, 9% apical taper, variable |
| heat treatment | gold, post-grinding |
| role | third and largest standard finisher |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 25 mm · 31 mm |
| hand version | protaper ultimate® hand f3, 21 mm |
what if f3 is loose too?
dentsply sirona’s literature does not go past f3 in the standard sequence. the auxiliary fx and fxl have their own sequence, for larger and straighter canals – it is worth reading their procedure before switching mid-case.
which cone and point?
the f3 ones, matched to the colour and size of the last file used.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| whole sequence | protaper ultimate® sequence, 21 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 21 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, f3 |
| fill and seal | conform fit® gutta-percha, f3 · ah plus®, neosealer® ezflo, 21 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® f3, 21 mm (6) · 030.009v · gold heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr6210f3
protaper ultimate® · fx · 21 mm
larger canalsstraighter canalsmaxillary centralspalatal and distal roots
a maxillary central incisor, some palatal or distal molar canals, a pathologic or iatrogenic defect. those are dentsply sirona’s own examples of the larger, straighter canals the standard finishers are not written for. they get a separate, shorter sequence: slider, then fx, then fxl if it is needed. this is the 21 mm version – the same file on the shortest shaft, for short teeth or where opening is limited.
| 35/.12v tip / taper | blue heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® fx rotary file, 21 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› where dentsply sirona say to use it. “in larger and straighter canals only, such as maxillary central incisors, some palatal or distal canals of molars, or when there is a pathologic or iatrogenic defect”.
› blue, not gold. fx and fxl are the only files in the range with dentsply sirona’s blue heat treatment.
› rotary or by hand, in the same step. their procedure names either a mechanically driven or a manual fx, so the hand version is a like-for-like alternative.
1 slider first, as usual. follow steps 1 to 6 of the standard procedure – slider to length, patency, irrigation.
2 then fx to length. once working length is established and patency confirmed, passively follow the canal to length in one or more passes and inspect the apical flutes. loaded with debris: finished.
3 loose and clean? fxl. use the fxl the same way. then disinfect, dry and fill as the standard sequence (steps 16–20).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 035.012v – iso 35 tip, .12 variable taper |
| heat treatment | blue |
| role | auxiliary finisher, larger and straighter canals only |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 25 mm · 31 mm |
| hand version | protaper ultimate® hand fx, 21 mm |
can i use fx in a curved molar canal?
dentsply sirona limit fx and fxl to larger and straighter canals, and give their examples. a curved canal belongs to the standard sequence.
does it replace the shaper?
in their larger-canal sequence, yes – it is slider, then fx. no shaper, no f1 to f3.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| if fx is loose | protaper ultimate® fxl, 21 mm |
| whole sequence | protaper ultimate® sequence, 21 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 21 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, fx |
| fill and seal | conform fit® gutta-percha, fx · ah plus®, neosealer® ezflo, 21 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® fx, 21 mm (6) · 035.012v · blue heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr6210fx
protaper ultimate® · fxl · 21 mm
large canalsstraight canalsmaxillary centralsdefects
fx went to length and its flutes came out clean. the canal is larger still, and dentsply sirona’s larger-canal sequence goes one size up: fxl, an iso 50 tip on a .10 variable taper, blue heat-treated. this is the 21 mm version – the same file on the shortest shaft, for short teeth or where opening is limited.
| 50/.10v tip / taper | blue heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® fxl rotary file, 21 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› larger and straighter canals only. the same limit dentsply sirona put on fx: maxillary central incisors, some palatal or distal molar canals, or a pathologic or iatrogenic defect.
› the end of the range. nothing in the protaper ultimate® range goes larger than a 50 tip.
› blue heat-treated, rotary or hand. dentsply sirona name either a mechanically driven or a manual fxl in their procedure.
1 after fx, never instead of it. if fx is loose at length and its apical flutes are not loaded with debris, select fxl and use it the same way.
2 finished when two things agree. the apical extent of the finisher is loaded with debris, and the corresponding gutta-percha point fits at working length.
3 then as the standard sequence. disinfect, dry with matched points, fill and seal (steps 16–20).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 050.010v – iso 50 tip, .10 variable taper |
| heat treatment | blue |
| role | largest auxiliary finisher, larger and straighter canals only |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 25 mm · 31 mm |
| hand version | protaper ultimate® hand fxl, 21 mm |
why is the taper lower than the fx?
the .10 taper sits on a much larger 50 tip – the file is still the biggest in the range. dentsply sirona publish the size and taper, not a reason, so we will not invent one.
is there a matched cone?
yes – conform fit® fxl gutta-percha and fxl absorbent points, both linked below.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| whole sequence | protaper ultimate® sequence, 21 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 21 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, fxl |
| fill and seal | conform fit® gutta-percha, fxl · ah plus®, neosealer® ezflo, 21 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® fxl, 21 mm (6) · 050.010v · blue heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr621fxl
protaper ultimate® · f3 · 25 mm
wider canalsapical shapingdeep shape
f2 came out loose and clean as well. then the canal is wider than f2’s tip, and dentsply sirona’s standard sequence finishes on f3: 30/.09v, gold heat-treated, the steepest apical taper of the three standard finishers. this is the 25 mm version, the middle of the three lengths.
| 30/.09v tip / apical taper | gold heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® f3 rotary file, 25 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› 9% at the apex. the deep-shape principle carried to the largest standard finisher – f1 7%, f2 8%, f3 9% apical taper.
› why dentsply sirona want the shape deep. their fact file argues that removing debris and smear layer by irrigation is less predictable apically than coronally, and that apical shape influences it – so the finishers keep the apical taper up.
› gold heat-treated. post-grinding, the same as the shaper, f1 and f2.
1 only after f2. if f2 is loose at length and its apical flutes are not loaded with debris, select f3 and use it the same way (step 12).
2 finished when two things agree. “the preparation is finished when the apical extent of any finisher is loaded with debris, and the corresponding gutta-percha point fits at the wl” (step 15).
3 then disinfect and dry. 3-d disinfection with the endoactivator®, then matched absorbent points (steps 16–17).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 030.009v – iso 30 tip, 9% apical taper, variable |
| heat treatment | gold, post-grinding |
| role | third and largest standard finisher |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 21 mm · 31 mm |
| hand version | protaper ultimate® hand f3, 25 mm |
what if f3 is loose too?
dentsply sirona’s literature does not go past f3 in the standard sequence. the auxiliary fx and fxl have their own sequence, for larger and straighter canals – it is worth reading their procedure before switching mid-case.
which cone and point?
the f3 ones, matched to the colour and size of the last file used.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| whole sequence | protaper ultimate® sequence, 25 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 25 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, f3 |
| fill and seal | conform fit® gutta-percha, f3 · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® f3, 25 mm (6) · 030.009v · gold heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr6250f3
protaper ultimate® · fx · 25 mm
larger canalsstraighter canalsmaxillary centralspalatal and distal roots
a maxillary central incisor, some palatal or distal molar canals, a pathologic or iatrogenic defect. those are dentsply sirona’s own examples of the larger, straighter canals the standard finishers are not written for. they get a separate, shorter sequence: slider, then fx, then fxl if it is needed. this is the 25 mm version, the middle of the three lengths.
| 35/.12v tip / taper | blue heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® fx rotary file, 25 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› where dentsply sirona say to use it. “in larger and straighter canals only, such as maxillary central incisors, some palatal or distal canals of molars, or when there is a pathologic or iatrogenic defect”.
› blue, not gold. fx and fxl are the only files in the range with dentsply sirona’s blue heat treatment.
› rotary or by hand, in the same step. their procedure names either a mechanically driven or a manual fx, so the hand version is a like-for-like alternative.
1 slider first, as usual. follow steps 1 to 6 of the standard procedure – slider to length, patency, irrigation.
2 then fx to length. once working length is established and patency confirmed, passively follow the canal to length in one or more passes and inspect the apical flutes. loaded with debris: finished.
3 loose and clean? fxl. use the fxl the same way. then disinfect, dry and fill as the standard sequence (steps 16–20).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 035.012v – iso 35 tip, .12 variable taper |
| heat treatment | blue |
| role | auxiliary finisher, larger and straighter canals only |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 21 mm · 31 mm |
| hand version | protaper ultimate® hand fx, 25 mm |
can i use fx in a curved molar canal?
dentsply sirona limit fx and fxl to larger and straighter canals, and give their examples. a curved canal belongs to the standard sequence.
does it replace the shaper?
in their larger-canal sequence, yes – it is slider, then fx. no shaper, no f1 to f3.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| if fx is loose | protaper ultimate® fxl, 25 mm |
| whole sequence | protaper ultimate® sequence, 25 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 25 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, fx |
| fill and seal | conform fit® gutta-percha, fx · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® fx, 25 mm (6) · 035.012v · blue heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr6250fx
protaper ultimate® · fxl · 25 mm
large canalsstraight canalsmaxillary centralsdefects
fx went to length and its flutes came out clean. the canal is larger still, and dentsply sirona’s larger-canal sequence goes one size up: fxl, an iso 50 tip on a .10 variable taper, blue heat-treated. this is the 25 mm version, the middle of the three lengths.
| 50/.10v tip / taper | blue heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® fxl rotary file, 25 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› larger and straighter canals only. the same limit dentsply sirona put on fx: maxillary central incisors, some palatal or distal molar canals, or a pathologic or iatrogenic defect.
› the end of the range. nothing in the protaper ultimate® range goes larger than a 50 tip.
› blue heat-treated, rotary or hand. dentsply sirona name either a mechanically driven or a manual fxl in their procedure.
1 after fx, never instead of it. if fx is loose at length and its apical flutes are not loaded with debris, select fxl and use it the same way.
2 finished when two things agree. the apical extent of the finisher is loaded with debris, and the corresponding gutta-percha point fits at working length.
3 then as the standard sequence. disinfect, dry with matched points, fill and seal (steps 16–20).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 050.010v – iso 50 tip, .10 variable taper |
| heat treatment | blue |
| role | largest auxiliary finisher, larger and straighter canals only |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 21 mm · 31 mm |
| hand version | protaper ultimate® hand fxl, 25 mm |
why is the taper lower than the fx?
the .10 taper sits on a much larger 50 tip – the file is still the biggest in the range. dentsply sirona publish the size and taper, not a reason, so we will not invent one.
is there a matched cone?
yes – conform fit® fxl gutta-percha and fxl absorbent points, both linked below.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| whole sequence | protaper ultimate® sequence, 25 mm (5) · slider, shaper, f1, f2, f3 |
| patency | c-pilot® 010, 25 mm · a small stainless hand file, as the sequence asks for when the slider will not reach |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, fxl |
| fill and seal | conform fit® gutta-percha, fxl · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® fxl, 25 mm (6) · 050.010v · blue heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr625fxl
protaper ultimate® · f3 · 31 mm
wider canalsapical shapingdeep shape
f2 came out loose and clean as well. then the canal is wider than f2’s tip, and dentsply sirona’s standard sequence finishes on f3: 30/.09v, gold heat-treated, the steepest apical taper of the three standard finishers. this is the 31 mm version, for long roots that a 25 mm file will not take to working length.
| 30/.09v tip / apical taper | gold heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® f3 rotary file, 31 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› 9% at the apex. the deep-shape principle carried to the largest standard finisher – f1 7%, f2 8%, f3 9% apical taper.
› why dentsply sirona want the shape deep. their fact file argues that removing debris and smear layer by irrigation is less predictable apically than coronally, and that apical shape influences it – so the finishers keep the apical taper up.
› gold heat-treated. post-grinding, the same as the shaper, f1 and f2.
1 only after f2. if f2 is loose at length and its apical flutes are not loaded with debris, select f3 and use it the same way (step 12).
2 finished when two things agree. “the preparation is finished when the apical extent of any finisher is loaded with debris, and the corresponding gutta-percha point fits at the wl” (step 15).
3 then disinfect and dry. 3-d disinfection with the endoactivator®, then matched absorbent points (steps 16–17).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 030.009v – iso 30 tip, 9% apical taper, variable |
| heat treatment | gold, post-grinding |
| role | third and largest standard finisher |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 21 mm · 25 mm |
| hand version | protaper ultimate® hand f3, 31 mm |
what if f3 is loose too?
dentsply sirona’s literature does not go past f3 in the standard sequence. the auxiliary fx and fxl have their own sequence, for larger and straighter canals – it is worth reading their procedure before switching mid-case.
which cone and point?
the f3 ones, matched to the colour and size of the last file used.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| whole sequence | protaper ultimate® sequence, 31 mm (5) · slider, shaper, f1, f2, f3 |
| patency | a small stainless steel hand file in 31 mm, as the sequence asks for when the slider will not reach – there is no 31 mm c-pilot®, so ask us |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, f3 |
| fill and seal | conform fit® gutta-percha, f3 · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® f3, 31 mm (6) · 030.009v · gold heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr6310f3
protaper ultimate® · fx · 31 mm
larger canalsstraighter canalsmaxillary centralspalatal and distal roots
a maxillary central incisor, some palatal or distal molar canals, a pathologic or iatrogenic defect. those are dentsply sirona’s own examples of the larger, straighter canals the standard finishers are not written for. they get a separate, shorter sequence: slider, then fx, then fxl if it is needed. this is the 31 mm version, for long roots that a 25 mm file will not take to working length.
| 35/.12v tip / taper | blue heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® fx rotary file, 31 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› where dentsply sirona say to use it. “in larger and straighter canals only, such as maxillary central incisors, some palatal or distal canals of molars, or when there is a pathologic or iatrogenic defect”.
› blue, not gold. fx and fxl are the only files in the range with dentsply sirona’s blue heat treatment.
› rotary or by hand, in the same step. their procedure names either a mechanically driven or a manual fx, so the hand version is a like-for-like alternative.
1 slider first, as usual. follow steps 1 to 6 of the standard procedure – slider to length, patency, irrigation.
2 then fx to length. once working length is established and patency confirmed, passively follow the canal to length in one or more passes and inspect the apical flutes. loaded with debris: finished.
3 loose and clean? fxl. use the fxl the same way. then disinfect, dry and fill as the standard sequence (steps 16–20).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 035.012v – iso 35 tip, .12 variable taper |
| heat treatment | blue |
| role | auxiliary finisher, larger and straighter canals only |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 21 mm · 25 mm |
| hand version | protaper ultimate® hand fx, 31 mm |
can i use fx in a curved molar canal?
dentsply sirona limit fx and fxl to larger and straighter canals, and give their examples. a curved canal belongs to the standard sequence.
does it replace the shaper?
in their larger-canal sequence, yes – it is slider, then fx. no shaper, no f1 to f3.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| if fx is loose | protaper ultimate® fxl, 31 mm |
| whole sequence | protaper ultimate® sequence, 31 mm (5) · slider, shaper, f1, f2, f3 |
| patency | a small stainless steel hand file in 31 mm, as the sequence asks for when the slider will not reach – there is no 31 mm c-pilot®, so ask us |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, fx |
| fill and seal | conform fit® gutta-percha, fx · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® fx, 31 mm (6) · 035.012v · blue heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr6310fx
protaper ultimate® · fxl · 31 mm
large canalsstraight canalsmaxillary centralsdefects
fx went to length and its flutes came out clean. the canal is larger still, and dentsply sirona’s larger-canal sequence goes one size up: fxl, an iso 50 tip on a .10 variable taper, blue heat-treated. this is the 31 mm version, for long roots that a 25 mm file will not take to working length.
| 50/.10v tip / taper | blue heat treatment | 400 rpm 4–5.2 ncm |
sizes as dentsply sirona print them. motor settings from their fact file.
this pack: protaper ultimate® fxl rotary file, 31 mm (pack of 6)
dentsply sirona · made by maillefer instruments holding sàrl, ballaigues, switzerland
› larger and straighter canals only. the same limit dentsply sirona put on fx: maxillary central incisors, some palatal or distal molar canals, or a pathologic or iatrogenic defect.
› the end of the range. nothing in the protaper ultimate® range goes larger than a 50 tip.
› blue heat-treated, rotary or hand. dentsply sirona name either a mechanically driven or a manual fxl in their procedure.
1 after fx, never instead of it. if fx is loose at length and its apical flutes are not loaded with debris, select fxl and use it the same way.
2 finished when two things agree. the apical extent of the finisher is loaded with debris, and the corresponding gutta-percha point fits at working length.
3 then as the standard sequence. disinfect, dry with matched points, fill and seal (steps 16–20).
paraphrased and quoted from the dentsply sirona, protaper ultimate® step-by-step procedure. your clinical judgement governs the case; the instructions for use govern the file.
| printed size | 050.010v – iso 50 tip, .10 variable taper |
| heat treatment | blue |
| role | largest auxiliary finisher, larger and straighter canals only |
| motor | 400 rpm · 4–5.2 ncm |
| other lengths | 21 mm · 25 mm |
| hand version | protaper ultimate® hand fxl, 31 mm |
why is the taper lower than the fx?
the .10 taper sits on a much larger 50 tip – the file is still the biggest in the range. dentsply sirona publish the size and taper, not a reason, so we will not invent one.
is there a matched cone?
yes – conform fit® fxl gutta-percha and fxl absorbent points, both linked below.
which motor?
400 rpm and 4–5.2 ncm for every file in the range. dentsply sirona list a protaper ultimate® library among the x-smart® go’s presets; on the x-smart® pro+ it is set as a custom sequence, and on the vdw.silver® in a dr’s choice slot (vdw manual: up to 4.1 ncm). all three are linked below.
when do i throw it away?
dentsply sirona’s procedure: inspect the flutes on every removal, and if you see unwinding, straightening or stretching, discard it and use a new file.
| whole sequence | protaper ultimate® sequence, 31 mm (5) · slider, shaper, f1, f2, f3 |
| patency | a small stainless steel hand file in 31 mm, as the sequence asks for when the slider will not reach – there is no 31 mm c-pilot®, so ask us |
| lubricant | glyde™ file prep · named on dentsply sirona’s own sequence card |
| irrigants | chlorax 5.25% · chlorax 2% · endo-solution 17% edta |
| delivery | dentsply sirona irrigation needles (40) |
| activation | smartlite pro endoactivator® |
| dry | protaper ultimate® paper points, fxl |
| fill and seal | conform fit® gutta-percha, fxl · ah plus®, neosealer® ezflo, 25 mm tips or proroot® bio sealer |
| coronal seal | sdr® flow+ refill, universal |
| motor | x-smart® go · x-smart® pro+ · vdw.silver® reciproc® |
protaper ultimate® fxl, 31 mm (6) · 050.010v · blue heat treatment · niti rotary · 400 rpm, 4–5.2 ncm · dentsply sirona · ref bstpulr631fxl