Round End Cylinder 014XC (5)

MDT · Round End Cylinder 014XC · 5

Round end cylinderExtra coarseReusable

Round end cylinder 014, extra coarse

MDT’s round end cylinder, ISO shape 141 (listed by MDT beside 881KS1): 1.4 mm across, on a 21 mm FG long shank. Extra coarse grit, black ring. Non-sterile, in fives.

This pack: MDT Round End Cylinder Diamond Bur, FG, ISO 141 size 014, extra coarse (black ring), 21 mm (Pack of 5, non-sterile)

Supplied clean, not sterile

MDT supply these burs "mechanically clean, but NOT sterile": clean and steam-sterilise them before first use and before each reuse – MDT’s instructions give 134°C with a 4-minute hold and 15 minutes’ drying. "Do not use worn-out or dull instruments."

What MDT say about it

›  MDT’s catalogue sets their diamonds at 60% diamond exposure against 40% for others – "More Diamond Per Diamond®" – listing "stronger bonding" and "uniform diamond coating, including the tips" among the features, and "faster & cooler cutting/grinding" and "slower clogging" among the benefits.

›  MDT say their “Triton” coating process "more than doubles the strength of the diamond bonding to the tool", on "Swiss-made heat treated and ground Stainless Steel shanks".

›  Speed, from MDT’s instructions for a 1.4 mm head: 70,000–220,000 rpm recommended, never more than 450,000 rpm.

›  Keep the bur moving and do not press hard – MDT warn that excessive pressure and a stationary bur both generate heat.

Complete the set

MDT round end cylinder · ISO 141 014XC · extra coarse, black ring · FG 21 mm · Pack of 5 · non-sterile · REF MDT-141-014XC-5 · Made by MDT Micro Diamond Technologies, Israel