MDT Daisy™ LiDiSi Spiral, HG (10)

MDT Daisy™ · LiDiSi · HG · 10

Lithium disilicateHG – high glossPack of 10

Daisy LiDiSi HG – the high-gloss second step for lithium disilicate and silicate ceramics

MDT’s Daisy™ Contour Polishine® spiral for lithium disilicate and silicate ceramics, in the HG (fine) grit – the high-gloss second step. A 14 mm open spiral of flexible lamellae, yellow, run at 7,000–10,000 rpm. Paired with the LiDiSi SF.

This pack: MDT Daisy™ Contour Polishine® LiDiSi Spiral Polisher, HG (fine grit, yellow), 14 x 1.6 mm, RA (Pack of 10)

What MDT say about it

›  MDT describe Daisy as a new generation of open-shape polishers with flexible lamellae, which they say adapt easily to the surface, increase contact with the material, keep a constant air supply and reduce frictional heat.

›  For lithium disilicate MDT say it is "especially suitable for silicate porcelain", with "diamond grit for high efficiency" and a "polishing result [that] matches glazing".

›  MDT’s recommended speed for the lidisi Daisy: 7,000–10,000 rpm.

›  Reusable: MDT’s pack label carries the 134°C steam-sterilisation symbol.

SF or HG?

Each Daisy comes in two grits, used as a pair. MDT’s sheet lists SF as the medium grit and HG as the fine grit, so SF comes first and HG gives the final gloss. Both are 14 mm across and 1.6 mm thick, and each material has its own colour pair so the two steps are easy to tell apart.

Complete the set

MDT Daisy™ LiDiSi HG · fine grit, yellow · 14 x 1.6 mm · 7,000–10,000 rpm · RA · Pack of 10 · Made by MDT Micro Diamond Technologies, Israel · REF MDT-DLP-14HG