Round carbide bur · FG 014 · Dentsply Sirona
Round carbideFriction gripSize 014Pack of 6
Maillefer’s carbide burs are cut from high-tenacity, micro-grain hard metal, and their brochure lists the round cavity bur (E 0123) for perforation, penetration, trepanation, excavation and retention.
This pack: 6 × round carbide burs, friction grip, size 014 · REF E012337101400
Made by Dentsply Sirona (Maillefer)
| Shape | Round (Maillefer range E 0123) |
| Material | Tungsten carbide, cut from high-tenacity micro-grain hard metal (Maillefer brochure) |
| Shank | Friction grip (FG) |
| Size | 014 (ISO) |
| Speed | Maillefer recommend 150,000 to 200,000 rpm for ISO 012 and above (carbide brochure) |
| Use | Perforation, penetration, trepanation, excavation, retention (Maillefer brochure, round cavity bur) |
What speed should size 014 run at?
Maillefer’s carbide burs brochure recommends 150,000 to 200,000 rpm for ISO 012 and above, and 300,000 rpm for burs up to ISO 010. It is general guidance for their carbide burs, so check the pack label too.
How does it differ from size 010?
Only the size. The size 010 pack is Round Carbide FG 010.
Can the burs be reused?
Maillefer’s Endodontic Access Preparation directions say rotary cutting instruments are disinfected and sterilised before each use, and that it is safest to use their instruments only once. They are written for the access set these burs belong to rather than for this exact pack, so follow the pack label and your own decontamination procedure.
| Same range | Round Carbide FG 010 · Round Carbide FG 014 (this page) · Transmetal FG 012, 25 mm · Transmetal FG 012, 19 mm · Round Diamond FG 016 |
| More access burs | Diamendo No.1, 21 mm · Zekrya Extra-Long Tapered Carbide Bur, 23 mm · Long Neck Carbide Bur 010 |
Round Carbide Bur FG · size 014 · friction grip · pack of 6 · Dentsply Sirona · REF E012337101400
SpotlightRECIPROC® MinimaOne file · slim shaping for narrow canals
Shaping systems
Hand files & finders
Materials & more