mdt endo access · e165 014c · 21 mm · 5
endo accesssafe enduncoated tip
mdt’s e165: a pointed-cone diamond with an uncoated tip – mdt list it with their safe end burs – 1.4 mm across with a 9 mm head, on a 21 mm fg shank. coarse grit, green ring. the 25 mm version is in the endo access kit; this 21 mm one is sold on its own.
this pack: mdt e165 endo access diamond bur, pointed cone with uncoated tip, fg, size 014, coarse (green ring), 21 mm (pack of 5, non-sterile)
| shape | pointed cone, uncoated tip (safe end) – mdt e165 |
| head | 1.4 mm diameter (size 014), 9.0 mm long |
| grit | coarse – green ring |
| shank | fg long, 21 mm overall |
| pack | 5, non-sterile, reusable |
| also available | 25 mm · monosteryl® sterile, 10 |
mdt supply these burs "mechanically clean, but not sterile": clean and steam-sterilise them before first use and before each reuse – mdt’s instructions give 134°c with a 4-minute hold and 15 minutes’ drying. "do not use worn-out or dull instruments."
› mdt’s catalogue sets their diamonds at 60% diamond exposure against 40% for others – "more diamond per diamond®" – listing "stronger bonding" and "uniform diamond coating, including the tips" among the features, and "faster & cooler cutting/grinding" and "slower clogging" among the benefits.
› mdt say their “triton” coating process "more than doubles the strength of the diamond bonding to the tool", on "swiss-made heat treated and ground stainless steel shanks".
› speed, from mdt’s instructions for a 1.4 mm head: 70,000–220,000 rpm recommended, never more than 450,000 rpm.
› keep the bur moving and do not press hard – mdt warn that excessive pressure and a stationary bur both generate heat.
both are long pointed cones in coarse diamond. mdt describe the e164, the ball-ended taper, as having a "rounded coated tip" – diamond right to the end – and the e165 as having an "uncoated tip", with no diamond on the tip itself. the e164 comes in three widths (011, 015, 018); the e165 in 014, at 21 or 25 mm.
yes – the same bur in mdt’s monosteryl® packing: monosteryl® e165 safe end 014c, ten burs each individually wrapped and gamma-sterilised, ready to use and single use.
| longer | tapered cone 014, 25 mm |
| coated tip | ball-ended taper 011 · ball-ended taper 015 · ball-ended taper 018 |
| the whole set | endo access kit |
mdt endo access e165 · 014 coarse, green ring · uncoated tip · 9 mm head · fg 21 mm · pack of 5 · non-sterile · made by mdt micro diamond technologies, israel · ref mdte165-014