Obtura Spartan · Applicator needles
The needle is what gets warm gutta percha to the right depth, and it is single use. Obtura Spartan's applicator needles are soft silver, designed to conduct heat so the tip stays at working temperature, and bendable so you can shape one to the tooth in front of you. 20G is the widest of the three – the least resistance to express through, and the choice when the canal takes it.
This pack: Obtura Applicator Needles, 20G, Black · pack of 5 · single use · fits the Obtura III Max handpiece
› Gauge: 20G, colour coded black
› Pack: 5 needles
› Use: Single use. Obtura Spartan require a new needle for every patient, and whenever damage is detected or suspected
› Bending: Once only, at the largest diameter, as close to the thermal protector as possible, using the Multi-Tool
› Express about 3cm of gutta percha before you start, so up-to-temperature material is sitting at the needle tip.
› Let the fill push the needle out of the canal rather than withdrawing it – Obtura Spartan warn that pulling it out can leave voids.
› Never bend at a taper, and never bend twice. A kink blocks flow, and repeated bending weakens the needle to the point of breakage.
› For awkward access, loosen the needle nut, rotate the needle and re-tighten – do not leave the nut loose to swivel during use.
Which gauge should I stock? The III Max system ships with 23G, which is the usual working choice. Practices doing a wide spread of cases tend to keep a wider gauge for generous canals and a narrower one for tight ones – 23G and 25G are the alternatives to this needle. The narrower the needle, the more the gutta percha has to be properly up to temperature to pass.
Can a needle be sterilised and re-used? No. These are single use. Obtura Spartan are explicit that the needle is changed after each patient, both for correct operation and to prevent cross-infection.
| Other gauges | 23G Blue · 25G Green |
| The unit | Obtura III Max System |
| Needed alongside | Multi-Tool · Needle Lock Nuts (2) · Thermal Protectors (4) |
| Keeping it clean | Obtura Cleaning Kit |
Single use · 20G · Black · Pack of 5 · Bendable · REF OBT-823620 · mfr code 823-620
SpotlightRECIPROC® MinimaOne file · slim shaping for narrow canals
Shaping systems
Hand files & finders
Materials & more