ham

NeoSEALER EZFlo - bioceramic sealer that flows through a 29 gauge NaviTip

WaveOne® Gold Medium, 25mm (3)
WaveOne® Gold Medium, 25mm (3)
WaveOne® Gold Medium, 25mm (3)

WaveOne® Gold Medium, 25mm (3)

a0753225g0m03
£52.40 +VAT
deals for this product
buy 10 in Glide Path & Shaping to get 10.00% off
buy 15 in Glide Path & Shaping to get 15.00% off
buy 2 in Glide Path & Shaping to get 2.00% off
buy 5 in Glide Path & Shaping to get 5.00% off

WaveOne® Gold Medium · 25 mm · pack of 3

Most casesWider canalsNecrotic casesRetreatment

A bigger apical preparation that does not cost you the crown

The default length? Twenty-five millimetres is the length most cases call for, and the one most practices stock first. This is the Medium – wider canals and larger apical preparations – in that length.

This pack: 3 × WaveOne® Gold Medium (035/.06v), 25 mm · pre-sterilised blister, single-patient use
Made by Dentsply Sirona – Maillefer, Switzerland

When the Primary reaches length loosely

Gauging is the step that decides this. If the Primary drops to working length without resistance, the apical preparation is smaller than the canal it is sitting in, and the file that fits is the Medium – a 0.35 mm tip on a .06 variable taper.

The taper steps down as the tip diameter goes up, which is the point of the range: a bigger apical size need not mean a bigger coronal one. On a distal or palatal root that is the difference between a shaped canal and a thinned one.

Necrotic cases and the irrigation argument

A larger apical preparation is the usual answer where disinfection is doing the heavy lifting: a necrotic tooth, a retreatment, a canal you want the irrigant to actually reach and exchange in. The Medium gives that without a separate instrument sequence.

It is still one file, one motion and one motor setting – the Medium follows the Primary in the same reciprocating mode, so nothing about the case set-up changes.

On the taper figure: .06 is the nominal designation at the tip. The taper eases coronally rather than holding .06 up the shaft, and Dentsply publish no average-taper figure for WaveOne® Gold, so none is quoted here.

Tip and taperISO 035, .06 variable taper
Length25 mm · 11 mm handle
Colour codeGreen
Supply3 per blister, pre-sterilised · A0753225G0M03

Step-up size. Where gauging shows the Primary is loose at length.

Lower taper, bigger tip. 0.35 mm apical on a .06 variable taper.

Necrotic and retreatment cases. A larger apical preparation for irrigant exchange.

Complete the system

Other sizesSmall · Primary · Large
Other lengthsMedium 21 mm · Medium 31 mm
Glide pathGold Glider 25 mm · same motion, same setting
Dry the canalPaper points Medium (180)
Matched fillConform Fit® GP Medium (60)
Every sizeAssorted 25 mm · one of each

Questions we get asked

Do I still need a glide path? Yes. Secure the canal to length with a #10 hand file and confirm patency, then the Gold Glider creates the glide path in the same reciprocating motion. The instructions for use require a secured, patent canal first.

Do I use the Medium on its own? No. It follows the Primary in the sequence – the Primary establishes the shape, gauging tells you whether to step up.

What motor do I need? Any motor carrying the WaveOne setting – X-Smart® Pro+, X-Smart® Go, VDW.SILVER® and VDW.GOLD® RECIPROC®.

WaveOne® Gold Medium · 035 · .06 variable taper · 25 mm · gold heat-treated NiTi · pre-sterilised, single use · Dentsply Sirona · mfr code A0753225G0M03

Other documents
DS_WaveOneGold.pdf
WaveOne Gold Brochure


carefully crafted bymmcpix.com
website and database designers