Ultrasonic file · MANI U-File · ISO 20/.02 · 33 mm · 6
Same instrument, next size. A MANI U-File with a 0.20 mm tip and the yellow ISO band, so it is picked out of a tray at a glance.
This pack: 6 × MANI U-File ultrasonic files, ISO size 20, .02 taper, 33 mm, stainless steel, supplied non-sterile
Made by MANI, Inc., Japan – medical and dental instrument maker since 1956
| Use | On an ultrasonic unit that takes a 0.8 mm shank (MANI) |
| Working part | 16 mm cutting flute on a 33 mm instrument |
| Cross-section | Square, sizes 10 to 40 (MANI) |
| Size and taper | ISO 20 – 0.20 mm tip, .02 taper, yellow band |
› Other sizes: U-File 15, 33 mm, U-File 25, 33 mm, U-File 35, 33 mm.
Will it fit my ultrasonic unit?
MANI’s requirement is a device that takes a 0.8 mm shank for sizes 10 to 40. The attachment and the power needed differ from one unit to the next, so MANI say to follow the instructions from your unit’s maker.
What does MANI say it is for?
MANI list the intended use as root canal enlargement, and describe U-Files as "very useful for cleaning or cutting root canal".
General points from the endodontic literature about ultrasonic files as a group – not MANI’s instructions, and not specific to U-Files.
› Low power, short bursts. Van der Vyver, Vorster and Jonker (South African Dental Journal, 2020) work in the lower quarter of the unit’s power range and tap the foot control for one to two seconds rather than running it continuously.
› Watch the heat. The same authors note that stainless steel tips can overheat with continuous activation, and that a temperature rise above 10°C risks the tissues around the root.
› For irrigant activation, keep it free. The file is usually held short of working length and left to oscillate without binding on the canal walls – van der Sluis et al. (International Endodontic Journal, 2007) is the standard review.
| Irrigants | Chlorax 5.25% · Endo-Solution 17% EDTA |
| Delivery | IrriFlex 30 ga · NaviTip 29 ga |
| Hand files | MANI D-Finder 10, 25 mm · C-PILOT 010, 25 mm |
| Coronal seal | SDR flow+ Refill Universal |
Ultrasonic file · ISO 20 · .02 taper · 33 mm · 16 mm working part · 0.8 mm shank · stainless steel · non-sterile · 6 per pack · MANI · REF 35643
SpotlightRECIPROC® MinimaOne file · slim shaping for narrow canals
Shaping systems
Hand files & finders
Materials & more