DiaDent® Dia-Pro ISO Paper Points 40/.04 (120)

DiaDent® Dia-Pro ISO · paper points · 40/.04 · 120

Drying.04 taperSterile cell packSingle use

Dia-Pro ISO paper points 40/.04, pre-sterilised in cells

DiaDent’s Dia-Pro ISO paper points: “highly absorbent”, “uniformly tapered to match .04 and .06 tapered instruments”, millimetre marked, and in a cell pack that DiaDent state is pre-sterilised – “points remain sterile until opened”. ISO 40 on a .04 taper, 120 points.

This pack: DiaDent® Dia-Pro ISO Paper Points 40/.04 (120)
Made by DiaDent

›  Marked for a first read. DiaDent: the markings “provide preliminary guidance in measuring the root canal depth before proceeding clinically with the application of Gutta Percha Points”.
›  Sterile until you open the cell. DiaDent’s cell pack keeps each size sealed; their instructions add that sterility is not guaranteed once a cell is opened, and the points are single use.
›  Then the matching cone. Dia-Pro ISO gutta percha 40/.04.

What we get asked

Are they sterile?
Yes. These are DiaDent’s cell packs – “cell packs are pre-sterilised” and “points remain sterile until opened”, in their words; the Instructions for Use give the method as irradiation. DiaDent add that sterility is not guaranteed once a cell is opened, and that the points are single use. Store at 2–27 °C away from moisture; shelf life is four years from manufacture. (DiaDent also make a sliding-open pack of these points, which is not sterile – we stock the cell pack.)

What are the millimetre marks for?
DiaDent: the markings “provide preliminary guidance in measuring the root canal depth before proceeding clinically with the application of Gutta Percha Points”. Their instructions have the point chosen to fit the apex, with its length and size checked against the shaped canal before it goes in.

Which cone, and which sealer?
The same size and taper – DiaDent’s instructions say the sterile points should be used “with the same size and thickness of the Gutta percha points”: Dia-Pro ISO gutta percha 40/.04. Then NeoSEALER EZFlo or NeoSEALER Flo – premixed bioceramic, EZFlo through a 29G NaviTip™ into the apical third, Flo through the wider Flex Flo tip (the 21 mm tip version of EZFlo is stocked too) – or AH Plus, the epoxy sealer every other one is measured against. Resin or bioceramic is a real choice of technique rather than a ranking; we carry both because both are right in different hands. DiaDent’s own directions put sealer on the canal walls and on “around 1mm” of the cone tip before the cone is seated – cone and sealer are one step.

Complete the case

The range

Specifications and quotations are from DiaDent’s Instructions for Use (Gutta Percha Points Rev.2 and Absorbent Paper Points Rev.1, 2025), Safety Data Sheets (Rev.6) and Gutta Percha & Paper Point Reference Guide (2026). Brand names are the trademarks of their owners.

DiaDent® Dia-Pro ISO Paper Points 40/.04 (120) · DiaDent · REF MP258-708