Hand file · MANI D-Finder · ISO 08/.02 · 21 mm · 6
The orifice is on the radiograph and nothing will go in. ISO 08 is the finest D-Finder MANI make, and the one that goes first in a sclerosed canal.
This pack: 6 × MANI D-Finder hand files, ISO size 08, .02 taper, 21 mm, stainless steel
Made by MANI, Inc., Japan
| Cross-section | D-shaped – MANI state this increases strength and resilience |
| Cutting action | Reaming – rotary cuts of a quarter to a third of a turn (MANI) |
| Size and taper | ISO 08, .02 taper – 2% along the blade, 21 mm, 6 per pack |
› Other sizes: D-Finder 10, 21 mm, D-Finder 12, 21 mm, D-Finder 15, 21 mm.
› Same size, 25 mm: D-Finder 08, 25 mm.
› If it will not advance: C-PILOT 006, 21 mm – a step finer than the smallest D-Finder.
› Stiffer than a K-file. In MANI’s bending test the D-Finder took more force to bend than a conventional K-file at #08 and #10 – roughly half as much again at #10.
› Harder to break. MANI state that in their ductility test "D Finders are 1.5 times more resistant to fracture than other path finding files".
› Resists buckling. MANI’s internal buckling test shows a higher maximum load than conventional K-files at #08, #10 and #15.
Test results are MANI’s own laboratory data. Further reading: MANI D Finders: exploring the path – Dr Rich Mounce, endodontist and consultant to MANI, Endodontic Practice US.
What does the D-shaped cross-section actually do?
MANI state that the D-shaped section increases strength and resilience, and that the flutes are "shaped to prevent cutting in" – the screwing-in that drags a fine file deeper than intended.
Why not just use a smaller file?
Below ISO 08 the D-Finder range stops – C-PILOT starts at 006. MANI change the blade, not the diameter: with minimised cutting force it "is less likely to bite into the canal, and curbs the risk of creating ledges and perforations".
| Irrigants | Chlorax 5.25% · Endo-Solution 17% EDTA |
| Lubricant | Glyde File Prep · File-Eze IndiSpense |
| Shaping | RECIPROC Minima R20 – narrow canals · RECIPROC blue R25 |
| Glide path | C-PILOT 006, 21 mm · C-PILOT 008 |
| Coronal seal | SDR flow+ Refill Universal |
Hand file · ISO 08 · .02 taper · 21 mm · stainless steel · D-shaped · rubber stoppers · autoclavable · 6 per pack · MANI · REF MAND2108
SpotlightRECIPROC® MinimaOne file · slim shaping for narrow canals
Shaping systems
Hand files & finders
Materials & more