Start-X® Tip No. 5 (EMS)

Start-X® No. 5 · EMS thread

Pulp floorAccess cavityPiezo ultrasonicEMS thread

Start-X® No. 5: find the original pulp chamber floor

Calcifications and old filling material can hide the floor you need to read. No. 5 is the Start-X tip for revealing the original anatomy of the pulp chamber floor, with a thin, cylindrical active tip.

This pack: Dentsply Sirona Start-X® ultrasonic tip No. 5, pulp floor anatomy · EMS thread (M3 x 0.5 mm) · 1 tip

Specific design

›  Thin, cylindrical active tip – for close work on the chamber floor.

›  Active lateral part – creates a straight access to the canal.

›  Dentsply Sirona: canal orifice location made easier by removing the calcifications and filling materials that hide the original pulp chamber floor anatomy, with good visibility.

The Start-X idea

Dentsply Sirona developed the five Start-X tips with Professor Berutti, Professor Cantatore and Dr Castellucci on a simple principle: one tip, one clinical indication, to facilitate and optimise the preparation of the access cavity.

In Dentsply Sirona's words: “higher control and precision with ultrasonic inserts specifically designed for access cavity refinement and canal orifice location.”

›  Micro-milled active part – in Dentsply Sirona's words, minimising the risk of diamond grit loss in the patient's mouth.

›  Resistance to fracture – Dentsply Sirona describe it as excellent.

›  EMS thread – M3 x 0.5 mm. Need the other fitting? This tip is also made with an Satelec thread.

Which Start-X tip?

Using it, as the directions set out

›  Secure the tip to the handpiece with the key before use.

›  Start at a lower power setting and only increase it if necessary to safely accomplish the task. Dentsply Sirona give No. 5 a range of 3–8 on a EMS miniPiezon, adjusted to the clinical application; check your unit's own instructions too.

›  Irrigation is recommended for procedures that need high power, to avoid overheating.

›  A visual aid is recommended, for comfort and safety. Never run the generator with a damaged tip.

›  Contraindications: none known when used as recommended, but Dentsply Sirona recommend not using the tips in patients with a pacemaker.

Frequently asked questions

How is it different from No. 1?

No. 1 works on the walls and has a non-active end so it leaves the floor alone. No. 5 is the one designed to work on the floor itself.

Will it fit my ultrasonic unit?

This is the EMS-thread version (M3 x 0.5 mm), with Dentsply Sirona power settings for the EMS miniPiezon. If your unit takes Satelec-thread tips, choose the Satelec version.

Not sure? Call 01733 404999 or email sales@qedendo.com with the make and model and we will check it for you.

Complete the case

Downloads

›  Start-X® ultrasonic tips brochure (PDF, 0.5 MB, Dentsply Sirona) – all five tips and their indications, the power range for each on Satelec P5 / Newtron and EMS miniPiezon units, and the order codes by thread.

Dentsply Sirona · Start-X® ultrasonic tip No. 5 · EMS thread M3 x 0.5 mm · Dentsply ref A06610000500 · REF A0661-5