Endo Access Long Tapered 014C (5)

MDT Endo Access · 199 014C · 25 mm · 5

Endo accessLong taper25 mm

A long round end taper on a 25 mm shank

MDT’s round end taper, ISO shape 199 (listed by MDT beside 850): 1.4 mm across with a 10 mm head, on a 25 mm FG shank. Coarse grit, green ring.

This pack: MDT Endo Access Long Tapered Diamond Bur, round end taper, FG, ISO 199 size 014, coarse (green ring), 25 mm (Pack of 5, non-sterile)

Supplied clean, not sterile

MDT supply these burs "mechanically clean, but NOT sterile": clean and steam-sterilise them before first use and before each reuse – MDT’s instructions give 134°C with a 4-minute hold and 15 minutes’ drying. "Do not use worn-out or dull instruments."

What MDT say about it

›  MDT’s catalogue sets their diamonds at 60% diamond exposure against 40% for others – "More Diamond Per Diamond®" – listing "stronger bonding" and "uniform diamond coating, including the tips" among the features, and "faster & cooler cutting/grinding" and "slower clogging" among the benefits.

›  MDT say their “Triton” coating process "more than doubles the strength of the diamond bonding to the tool", on "Swiss-made heat treated and ground Stainless Steel shanks".

›  Speed, from MDT’s instructions for a 1.4 mm head: 70,000–220,000 rpm recommended, never more than 450,000 rpm.

›  Keep the bur moving and do not press hard – MDT warn that excessive pressure and a stationary bur both generate heat.

Complete the set

MDT round end taper · ISO 199 014C · coarse, green ring · 10 mm head · FG 25 mm · Pack of 5 · non-sterile · REF MDT-199-014C · Made by MDT Micro Diamond Technologies, Israel