Endo Access Round Long Neck 016C|21mm (5)

MDT Endo Access · 697 016C · 5

Endo accessLong neckRound

A 1.6 mm round diamond on a long neck

MDT’s 697 round long neck: a 1.6 mm round diamond head set on a long, slim neck, on a 21 mm FG long shank. Coarse grit, green ring.

This pack: MDT 697 Endo Access Round Long Neck Diamond Bur, FG, size 016, coarse (green ring), 21 mm (Pack of 5, non-sterile)

Supplied clean, not sterile

MDT supply these burs "mechanically clean, but NOT sterile": clean and steam-sterilise them before first use and before each reuse – MDT’s instructions give 134°C with a 4-minute hold and 15 minutes’ drying. "Do not use worn-out or dull instruments."

What MDT say about it

›  MDT’s catalogue sets their diamonds at 60% diamond exposure against 40% for others – "More Diamond Per Diamond®" – listing "stronger bonding" and "uniform diamond coating, including the tips" among the features, and "faster & cooler cutting/grinding" and "slower clogging" among the benefits.

›  MDT say their “Triton” coating process "more than doubles the strength of the diamond bonding to the tool", on "Swiss-made heat treated and ground Stainless Steel shanks".

›  Speed, from MDT’s instructions for a 1.6 mm head: 55,000–160,000 rpm recommended, never more than 450,000 rpm.

›  Keep the bur moving and do not press hard – MDT warn that excessive pressure and a stationary bur both generate heat.

Complete the set

MDT Endo Access 697 · 016 coarse, green ring · round long neck · FG 21 mm · Pack of 5 · non-sterile · REF MDT-697-016C · Made by MDT Micro Diamond Technologies, Israel