DA Access Safe End 015|9.0mm (5)

MDT Endo Access · E213 015M · 5

Endo accessSafe endExtra long

MDT’s DA Access safe end, 26.5 mm overall

The E213, which MDT list as "DA ACCESS" SAFE END: a 1.5 mm diamond with a 9 mm head, on MDT’s extra-long FG shank at 26.5 mm overall. Medium grit, blue ring.

This pack: MDT E213 "DA Access" Safe End Diamond Bur, FG, size 015, medium (blue ring), 26.5 mm overall (Pack of 5, non-sterile)

Supplied clean, not sterile

MDT supply these burs "mechanically clean, but NOT sterile": clean and steam-sterilise them before first use and before each reuse – MDT’s instructions give 134°C with a 4-minute hold and 15 minutes’ drying. "Do not use worn-out or dull instruments."

What MDT say about it

›  MDT’s catalogue sets their diamonds at 60% diamond exposure against 40% for others – "More Diamond Per Diamond®" – listing "stronger bonding" and "uniform diamond coating, including the tips" among the features, and "faster & cooler cutting/grinding" and "slower clogging" among the benefits.

›  MDT say their “Triton” coating process "more than doubles the strength of the diamond bonding to the tool", on "Swiss-made heat treated and ground Stainless Steel shanks".

›  Speed, from MDT’s instructions for a 1.5 mm head: 55,000–160,000 rpm recommended, never more than 450,000 rpm.

›  Keep the bur moving and do not press hard – MDT warn that excessive pressure and a stationary bur both generate heat.

Complete the set

MDT Endo Access E213 DA Access · 015 medium, blue ring · safe end · 9 mm head · 26.5 mm overall · Pack of 5 · non-sterile · REF MDT-E213-M · Made by MDT Micro Diamond Technologies, Israel