ham

NeoSEALER EZFlo - bioceramic sealer that flows through a 29 gauge NaviTip

RECIPROC® R25|31mm (6)
RECIPROC® R25|31mm (6)
RECIPROC® R25|31mm (6)
RECIPROC® R25|31mm (6)

RECIPROC® R25|31mm (6)

v040212031025
£104.94 +VAT
deals for this product
buy 10 in Glide Path & Shaping to get 10.00% off
buy 15 in Glide Path & Shaping to get 15.00% off
buy 2 in Glide Path & Shaping to get 2.00% off
buy 5 in Glide Path & Shaping to get 5.00% off

RECIPROC® R25 · 31 mm · 6 files

When 25 mm leaves you short of length

Canines, long-rooted premolars, and the occasional molar that measures longer than it looked. The 31 mm R25 is the same instrument as the everyday one – a 0.25 mm tip on an 8% taper over the first 3 mm, M-Wire®, S-shaped core, non-cutting tip – with the reach a long root needs and an extra pair of depth markings to read it by.

31 mm
LONGEST IN RANGE
5
DEPTH MARKINGS
1 file
PER MOLAR

This pack: 6 × RECIPROC® R25, 31 mm · 0.25 mm tip, 8% taper over the first 3 mm, D16 1.05 mm · radiopaque markings at 18/19/20/22/24 mm · sterile blisters, single use
Made by VDW, Munich – genuine RECIPROC®

Five markings instead of four. 18, 19, 20, 22 and 24 mm, radiopaque, so a long root still gives you a reference on the film.
Same instrument, same protocol. The size is chosen from the radiograph and a passive hand file, not from the length – and in most cases it is R25.
Match the rest of the case to the length. A 31 mm canal needs a hand file that reaches it too. Where the range runs short, we say so below rather than sell you something that stops at 25 mm.

Which hand file for patency at this length?
C-PILOT® is made in 19, 21 and 25 mm only, so it will not reach here. Use VDW K-Files ISO 010 in 31 mm – the same manufacturer, the size the directions ask for, in a length that reaches working length. ISO 008 and 015 are there too, the latter for a glide path if the instrument stalls.

Do I still avoid an initial glide path?
In the majority of canals, yes – De-Deus and colleagues (International Endodontic Journal, 2013) took the R25 to full working length without one in more than 93% of canals. Patency is still confirmed with an ISO 010 hand file between passes, and if the instrument stops advancing you withdraw it and create a glide path rather than forcing it.

Patency at 31 mmVDW K-Files 010 and 008 · flutes cleaned in the Interim Stand
Drive itVDW.SILVER® RECIPROC® · X-Smart® Pro+ · X-Smart® Go
IrrigateHypochlorite 5.25% or 2% · 17% EDTA · delivered by IrriFlex® 30g, activated with EDDY®
Dry, fill and sealPaper points R25 · gutta-percha R25 · NeoSEALER® EZFlo with 25 mm tips, the longest we stock, or AH Plus® · then SDR® flow+
Wider canals at lengthR40 and R50 in 31 mm, or the assorted blister

RECIPROC® R25, 31 mm · reciprocating single-file system · 0.25 mm tip, 8% taper over the first 3 mm, regressive, D16 1.05 mm · M-Wire® NiTi, S-shaped cross-section, non-cutting tip · 11 mm shaft · markings 18/19/20/22/24 mm · 6 sterile files, single use, one molar · VDW, Munich · REF V040212031025

Other documents
VDW_Reciproc.pdf
RECIPROC Brocuhre
VDW_RECIPROC_UserCard.pdf
User Card


carefully crafted bymmcpix.com
website and database designers